Requires: 1-4 USB cameras and USB Digital interface (ACT-710/711)
or: 1-4 Analog cameras and PCI video digitizer (National Instruments PCI-1407/08/10)
Requires: 1-4 Analog cameras and PCI video digitizer (National Instruments PCI-1407/08/10)
Drivers for USB Camera System
Drivers for USB Cameras (from Sentech).
Run the x86 installer StCamSWare_x86.exe to install drivers and a program for testing the cameras (StCamSWare.exe).
Drivers for ACT-712 Digital Interface.
Drivers for ACT-710 and ACT-711 Digital Interface (from National Instruments). Also available from Actimetrics here.
Drivers and Setup for IMAQ PCI-1408/08/10 Board and Analog (Panasonic) Camera System
Drivers for IMAQ Board (PCI-14xx) also available from Actimetrics here.
- Run this installer using Autorun.exe or Setup.exe.
- When you are asked for which features to install, leave NI-IMAQ and NI Measurement and Automation Explorer selected so that they will install.
- Set NI-IMAQdx and NI-IMAQ I/O not to install by clicking on each and selecting “Do not install this feature”.
Configure the cameras in Measurement and Automation Explorer